CS2RS Closed-Loop Stepper Drives (Modbus RTU)
CS2RS closed-loop stepper drives from Leadshine are based on standard Modbus RTU protocol, using RS485 communication and it can network up to 31 axes with built-in 16-segment position table (PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the overall maintenance cost. They also support the feature of teaching, the operation modes of profile position, profile velocity and homing. They can power 2-phase stepper motors (frame sizes NEMA 8, 11, 14, 17, 23, 24 and 34), with 1000 ppr to 5000 ppr incremental encoders.
The CS2RS series is highly reliable and affordable solution for in many industrial applications such as solar equipment, textile, civil, robotics, power generation equipment, 3C, packaging...
Overview: CS2R Closed-Loop Stepper Drive
How to configurate Leadshine CS2R With Software
Models Overview Table
Model | Command Source | Operation Voltage (VDC) | Output Current (A, Peak) | Input Frequency (Khz Max) | Logic Voltage (VDC) | # of Inputs | # of Outputs |
CS2RS-D503 | Modbus RTU | 20 - 50 | 3.0 | 10 | 12 - 24 | 7 | 3 |
CS2RS-D507 | Modbus RTU | 20 - 50 | 7.0 | 10 | 12 - 24 | 7 | 3 |
CS2RS-D1008 | Modbus RTU | 18-80VAC or 30-110VDC | 8.0 | 10 | 12 - 24 | 7 | 3 |
- CS2RS-D503 (24-50 Vdc, 0.5-3Amp,Modbus based on RS485)£102.50 £85.424 in stock. (If not in stock expect 4-5 weeks)More Information on Shipping
- CS2RS-D507 (24-50 Vdc, 0.5-7Amp,Modbus based on RS485)£142.57 £118.81-2 in stock. (If not in stock expect 4-5 weeks)More Information on Shipping
- CS2RS-D1008 (18-80VAC or 30-110VDC Vdc, 0.5-8Amp,Modbus based on RS485)£149.65 £124.71-6 in stock. (If not in stock expect 4-5 weeks)More Information on Shipping