American flag[email protected] American flag[email protected] +44 (0)1202 599922
main product photo

CS2RS-D503 (24-50 Vdc, 0.5-3Amp，Modbus based on RS485)

£102.50 £85.42
Notify me when the price drops
Icon Label Description Type Size Download
zip Leadshine-Motion-Studio-Stepper-V1.3.10 A free software which allows the user to modify the parameters of Leadshine's stepper and servo drives, performance adjustments, trial run, monitor the status etc. zip 29 MB Download
pdf CS2RS_Series_User_Manual_V1.5 User Manual for the CS2RS Stepper drive that works over Modbus RTU. pdf 2.8 MB Download
zip CS2RS-D503,507_3D 3D model of the CS2RS-D503 and the CS2RS-D507 zip 1.9 MB Download
zip Leadshine_Motion_Studio_Stepper_V1.3.10 Configuration software for the Leadshine range of stepper drivers zip 29 MB Download
CS2RS Closed Loop Drive with Modbus Control,
SKU
CS2RS-D503
4 in stock. (If not in stock expect 4-5 weeks)
More Information on Shipping
More Information
Country of ManufactureChina
ManufacturerLeadshine
Voltage Range24V~50VDC

The newly released CS3E-D503 supports CANopen over EtherCAT (CoE) control and CiA 402 operating modes including Profile Position (PP), Profile Velocity (PV), Homing (HM) and Cyclic Synchronous Position (CSP). The product can be matched with many brands of EtherCAT controller/PLC such as Beckhoff, Omron, Trio, Keneyce etc.

The CS3E-D503 is able to power 2 phase and 4 phase NEMA 8,11, 14 and 17 stepper motors with incremental encoders. It is highly reliable and affordable and performs excellently in many industrial applications

 
  • No loss of step, no hunting, no torque reservation.
  • CANopen over EtherCAT (CoE) with full support of CiA402,100Mbps full-duplex.
  • Operation modes: profile position, profile velocity, cyclic synchronous position, homing.
  • 7 configurable digital inputs, 7 optically isolated digital outputs include brake output.
  • Low noise and vibration, smooth motion.
  • USB port for Leadshine software connection.
  • Two 7-segment display velocity or slave ID or operation mode or error code.
  • Over voltage, over current and position following error, encoder cable error, etc. protections.
ModelCS3E-D503
SeriesCS3E-
Command SourceEtherCAT
Operation Voltage (VDC)20-50VDC
Output Current (A, Peak)3
Input Frequency (KHz, Max.)500 or 10
Logical Voltage (VDC)12-24
# of Inputs7
# of Outputs7
CharacteristicsStandard
CS3E-D503-dim

Downloads

Leadshine-Motion-Studio-Stepper-V1.3.10

A free software which allows the user to modify the parameters of Leadshine's stepper and servo drives, performance adjustments, trial run, monitor the status etc.
Download >

CS2RS_Series_User_Manual_V1.5

User Manual for the CS2RS Stepper drive that works over Modbus RTU.
Download >

CS2RS-D503,507_3D

3D model of the CS2RS-D503 and the CS2RS-D507
Download >

Leadshine_Motion_Studio_Stepper_V1.3.10

Configuration software for the Leadshine range of stepper drivers
Download >