Instructions for the communication between PT/PT2 HMI and controller CODESYS while updating and example. Application notes in Italian and English versions.
For industrial motion control, The FCT640 programmable plc controller: a new generation, modular, compact and high performing system based on CODESYS 3.5 with integrated I/Os.
FCT640 integrates motion control solutions into a single compact device.The controller is equipped with all the field buses used in industry (EtherCAT, CANopen, ModbusTCP) and integrated modular I/O units, both digital and analogue.
The choice of the OPC UA communication protocol is coming soon, to allow the system to be networked to the outside efficiently and safely by ensuring full connectivity with other devices as a relevant feature for Industry 4.0. interoperability.
The power of the processor, the presence of Ethernet and CAN ports and serial ports, along with a total memory capacity of over 1 GB plus an SD-Card, complete FCT640 technological equipment.
Dimensions mm: H 110 x W 57 x D 73. Weight gr: 300
TECHNICAL SPECIFICATIONS
PROCESSOR
CPU RISC dual core 64 bit
1.0 GHz three-level cache
POWER SUPPLY
24V DC
MEMORY CAPABILITY
1GB Nand flash for storage
512 MB DRAM high bandwidth 64 bit 1666 MT/s
32 KB Ferromagnetic RAM (non-volatile PLC data)
SD-Card
COMMUNICATION PORTS
1xRJ45 Ethernet 10/100 MBit TCP/IP (Debug)
2xRJ45 Ethernet 10/100 MBit (Fieldbus)
1xRJ45 CAN-Bus (CANopen Master)
INTEGRATED I/Os
64 modules, each with a max of 16-bit IO (1024 digital) or 8 channel analog (512 analog)