UIM243C04AT Miniature Stepper Motor Driver
Miniature Speed Control Stepper Motor Driver 40V - 4A (Integrated POT)
Country of Manufacture | China |
---|---|
Manufacturer | UI Robot |
EAN Number | 7.3919E+11 |
Voltage Range | 12~40VDC |
Miniature Speed Control Stepper Motor Driver 40V - 4A (Integrated POT)
Country of Manufacture | China |
---|---|
Manufacturer | UI Robot |
EAN Number | 7.3919E+11 |
Voltage Range | 12~40VDC |
DESCRIPTION
UIM243XXA/B stepper motor controller is a microprocessor embedded, voltage control,
miniature stepper motor controller. UIM243XX is integrally designed to fit onto stepper
motors, and is simple to control. With UIM243XXA/B, the motor speed can be controlled
by an analog voltage. It is simple, stable and low cost. UIM24302 can provide 0 - 2A
adjustable phase current through 10 ~ 30VDC input voltage. UIM24304 can provide 0 - 4A
adjustable phase current through 10 ~ 40VDC input voltage.
The microprocessor of the UIM243XXA/B is capable to ramp up the current speed to the
desired speed. It is possible to jump to 1900 rpm in 0.3 seconds. This feature makes the
sudden increase of the desired speed become possible. With the UIM243XX, the motor
speed can be controlled by an analog voltage in three optional ways: 1) the on-board
trimmer (UIM243XXA), 2) an external potentiometer (UIM243XXB) or, 3) an external
voltage (UIM243XXB). UIM243XX controllers can run the motor without user control
device. At the same time, with the high-speed current compensation function, UIM243XX
can compensate the effects caused by counter electromotive force, which is produced in
high-speed motor turning.
Miniature Integral Design
Motor Driver Features
Control Features