TS110 135 TB) Spinea Zero Backlash Gearbox
- 135:1 Ratio
- Zero Backlash
- Input flange mounting
- 11mm input bore
- 75mm PCT and 60mm locating spigot.
Country of Manufacture | Slovakia |
---|
Country of Manufacture | Slovakia |
---|
The T series represents a wide range of TwinSpin high precision reduction gears with a cylindrical shaped case. These gears comprise an accurate reduction mechanism and high-capacity radial and axial cylindrical roller bearings.
This design of reduction gears allows the mounting of the load directly on the output flange or the case, without the need of additional bearings. The T series high precision reduction gears are characterized by a modular design, which allows the mounting of your desirable type of motor by means of a connection flange.
The T series includes gears that are not completely sealed; an inlet flange and a gasket kit have to be used for the sealing. Upon the customer’s request, SPINEA is able to supply a completely sealed reduction gear with a flange according to the customer’s motor.
Case |
|
Input flange connection |
|
Input shaft design |
|
Installation and operation characteristics |
|
1) valid for TS 60, TS 70, TS 80, TS 110, TS 140
2) valid for TS 170, TS 200, TS 240, TS 300
Name |
Size |
Ratio | Series version |
Shaft version | |
---|---|---|---|---|---|
P (DIN 6885) | S | ||||
TS
|
60 |
35, 47, 63 | TB | 6 | • |
70 |
41, 57, 75 | TB | 11 | • | |
80 |
37, 63, 85 | TB | 8 | • | |
110 |
33, 67, 89, 119, 135 | TB | 14 | • | |
140 |
33, 57, 87, 115, 139 | TB | 19 | • | |
170 |
33, 59, 83, 105, 141 | TC | 24 | • | |
200 |
63, 83, 125, 169 | TC | 28 | • | |
240 |
37, 87, 121, 153 | TC | 28 | • | |
300 |
63, 125, 191 | TC | 28 | • |
An example of an ordering code of a modified TwinSpin T series reduction gear with a motor flange: TS200 – 125 –TC– P24 – M235 – P231. The markings M235 and P231 for a specific modification are defined by the manufacturer.