The SPS series switch mode power supplies are specifically designed to power inductive loads found in stepping & servo motors. The normal regulated switching power supplies popular in the market are usually working with bad variability and low efficiency when used in stepping or servo driving, this is because that the conventional switching power supplies are designed for the constant and unvarying loads of circuit boards. Whereas, when the stepping or servo system running, the driving current varies extremely fast, which is belonged to inductive load, herein the drivers and power supplies would be damaged easily. This series supplies are capable of delivering current to drivers without affecting the reliability due to their unregulated specialty and bulky capacitance. By selecting correct model, one supply can supply 1-3 drivers and so the average cost of per shaft is saved
Features
Specifically designed for motion control systems
Ultra compact size and light weight
180 -240 VAC Input voltage
68 VDC output (at 220 VAC input)
5A continuous output current (at 220 VAC input)
Short circuit and over-voltage protection
Electrical & Mechanical Specifications
Model
Output Voltage
Continuous Current
Peak Current
Supply Voltage *
Size (mm)
Weight(kg)
SPS407
42V
7A
9A
220VAC±10%
132*104*60
0.638
SPS487
48V
7A
9A
SPS705
68V
5A
7A
SPS407-L
42V
4.7A
9A
110VAC±10%
132*104*60
0.638
SPS487-L
48V
4.0A
9A
SPS705-L
68V
3.0A
7A
Operating Environment and Parameters
Cooling
Natural cooling or forced cooling
Operating Environment
Environment
Avoid dust, oil fog and corrosive gases
Ambient Temperature
0oC- 50oC
Humidity
40 - 90%RH
Vibration
5.9 m/s2 Max
Storage Temperature
-40oC - 70oC
Pin Assignment and Description
L
AC power input
N
E
Ground terminal. Recommend connect this port to the ground for better safety.