American flag[email protected] American flag[email protected] +44 (0)1202 599922
main product photo

CSMIO-MPG + Handwheel - module for manual axis operation for CSMIO/IP (-S, -A, -M)

£607.51 £506.26
Notify me when the price drops
Controller Expansion Modules,
SKU
CSMIO-MPG-HANDWHEEL
0 in stock. - If not in stock expect about 14-21 days
More Information on Shipping

CSMIO-MPG with a handwheel is a JOG support module for manual axis operation. The device lets you extend 6-axis CSMIO/IP controller with MPG function. It's an external module connected to the controller via Can bus.

More Information
Country of ManufacturePoland

CSMIO-MPG + Handwheel - module for manual axis operation for CSMIO/IP (-S, -A, -M)

 

CSMIO-MPG is a MPG (JOG) support module for manually axis operation. It is equipped with 3 digital multiplier inputs (x1 x10 x100), 6 controlled axis choice inputs, 2 independent inputs, 2 independent outputs, 2 analog inputs to connect potentiometer for feedrate correction and spindle speed correction, input and output of the emergency STOP.
 
The module can be connected only to the CSMIO controller. The CSMIO-MPG Module and is supplied with the Handheld Rotary encoder with E-Stop (pendant).
 
The CSMIO-MPG product allows to extend CSMIO/IP controller with manual pulse generation - MPG function. The device is manufactured as an outside module designed to connect it to the controller via Can bus.

By using the manual pulse generator it is possible to control maximum 6 axes precisely with no need to control using Mach3 program. Machine operator can watch machine’s work and control it at the same time.

Like the CSMIO/IP the CSMIO-MPG requires standard industrial 24V power supply voltage. Digital inputs and outputs are inside optically isolated and filtered. All is closed in a compact cover mounted on a DIN-rail, what makes that the mechanical and electronic installation in the control cabinet takes less time and is even simpler.

The manual pulse generation module is equipped with 3 digital inputs of multiplier selection (x1, x10, x100), 6 digital inputs of controlled axis selection, 1 digital input for general purposes, 2 analog inputs, 2 digital outputs for general purposes and E-STOP circuit.