The store will not work correctly in the case when cookies are disabled.
3M2280N Three phase High voltage digital microstepping driver
| Icon | Label | Description | Type | Size | Download |
 | 2M1180N-2M2280N-3M2280N 3D Models | 3D Models of the 2M range of high voltage Stepper drive. | zip | 22 KB | Download |
 | KincoCatalog_Stepper_K1E07_20210125 | Kinco Stepper Catalogue | pdf | 14.3 MB | Download |
0 in stock.
More Information on Shipping 220V AC±15% (50Hz)
Adaptible for 110/130 series 3-phase hybird stepper motors.
More Information | Country of Manufacture | China |
|---|
| Manufacturer | Kinco |
|---|
| Voltage Range | 20~50VDC |
|---|
3M2280N Three-phase High voltage Stepper Drive
- High Performance.
- Automatic Parameter Adjustment.
- Driver Test Run function.
- Phase Memory function.
- PLS/Dir & CW/CCW Control Signals.
- Opto-Isolated Error Output.
- Automatic phase current Reduction after 1.5 seconds.
- 14 Microstep options, maximum resolution being 20000 steps per rev.
- Over-Voltage, Under-voltage, Over-current over temperature protection.
- Step Smoothing filter, for smoother motion.
|  |
| Input Voltage | 220VAC±15%(50Hz)(187~253VAC) |
| Over-voltage protection | 395VDC |
| Under-voltage protection | 200VDC |
| Overheat protection | 80℃(Temperatureofthermistor) |
| Phase current (A) | 2.8/3.2/3.6/4.0/4.4/4.8/5.2/5.6/6.0/6.4/6.8/
7.2/7.6/8.0, 14 settable values in total. |
| Micro step | 400~30000 pulse/rev, total 14 subdivisions |
| Adaptable motor | 110/130 series 3-phase hybird stepper motor |
| Input signal Control signal mode | PLS(CW) / DIR(CCW) / FREE
PLS+DIR; CW/CCW, A+B |
| Output signal | ERR, open collector output, max current: 10mA |
| Automatic half-current | The driver will reduce the phase current to the motor by half after 1.5 seconds |
| Protection | Over-voltage, under-voltage, short circuit, and over-heat protection |
| Dynamic braking circuit | Absorb regenerated energy of motor by connecting to power resistor. |
| |
| Cooling method | Forced air cooling |
| Operation environment | Avoid the environment with metallic powder, oil mist, or erosive gases |
| Operation humidity | <85%, RH (non-condensing or water drops) |
| Operation temperature | 0℃ ~ +40℃ |
| Storage temperature | -20℃ ~ +70℃ |
| Weight (net) | 1.5Kg |
| Dimensions | 201 x 147 x 66 mm |
| Ingress protection | IP20 |
